Time And Date Settings - Strong SRT 7008 User Manual

Note:
SatCR A
SatCR B
System
IF Channel
Center Freq
Press  to store.

7.4 Time and date settings

Press MENU and select Time. The menu provides options to adjust the time and date settings.
Press p/q to select an option and tu to adjust the setting. Press  to exit the menu.
Time Offset :
Time Zone:
Date:
Time:
Auto-Standby
NOTE:
Timer
Daylight Saving Time
7.4.1 Timer (Schedule)
In this menu you can setup the schedule for automatic switching to the defined channels at a
particular date/time. The timer menu can be entered directly from viewing mode by pressing the
BLUE button.
Add:
SatCR can only work in combination with an optional multi-output (max.
8) satellite splitter and a SatCR LNB, example STRONG type SRT L780 (max.
4 users). Note: SatCR cannot be combined with any other DiSEqC function.
SatCR systems are mainly installed by professional experts.
Select SatCR A with p/q and OK, if you only use one SatCR LNB.
When using a two satellite SatCR system, select also the 2nd LNB and setup as
described below.
Automatic select: Pre-programmed User Bands are installed, refer to the
manual of your LNB to know which system is supported by the LNB.
Manual select: Select the User band ID number according to the
specifications of your SatCR LNB. Note: Any SatCR LNB user in the chain
needs a different Channel ID number.
Manual select: Select the Centre Frequency according to the specifications of
your SatCR LNB, corresponding with the correct IF Channel. Note: Any SatCR
LNB user in the chain needs a different Centre Frequency.
Select Auto for automatic time and date updates from live signal or Manual
for entering them manually.
Select the Offset from GMT standard time.
Enter the date when Time Offset is set to Manual.
Enter the time when Time Offset is set to Manual.
This feature is implemented for power saving. The receiver will turn to
Standby automatically if no command from the remote is received for the
selected time period. Default is 3 hours. It can also be turned Off.
If there are timers running, the auto standby function will be disabled for
the booked time.
Enter to the timer (schedule) function. Please refer to section 7.4.2 for details.
Select On or Off depending on the year's period.
Press RED to add a new booking. In the appearing dialog select channel type
and number, the starting date and time, end time, repeat cycle (once, daily or
weekly). Tip: For selecting the channel number you can use the tu.
When you have entered all parameters, press OK to store your booking.
19