Advertisement
3. 1
Mis-feed Error
"XXXX Mis-feed" is displayed in the UI screen when the media is jammed.
The jammed location when displaying "Mis-feed" is shown below.
Exit Section
Separation Section
Roll Deck Section
NOTE
(1) Be careful not to get paper cuts on your hand.
(2) Gently remove a jammed paper. When it does not reach Fuser Unit, toner on it may spill
off. If toner gets into eyes or your mouth, immediately rinse them with water and contact a
doctor.
(3) Gently remove a jammed paper. When it does not reach Fuser Unit, toner on it may spill
off on your cloth.
Dust off your cloth. Use cold water to wash in out. Using hot water may leave a stain.
(4) In case of a paper jam while in continuous printing, several sheets may stop in the printer
at a time. Remove entire the sheets from the printer. The system will get ready after the
cleaning process completes.
Media Feed Section
3-2
Scanner Section (MFP model)
Manual Feeder
Section
Chapter 3 Error Correction
Advertisement
Chapters
