KIP 700 C Series User Manual page 81

6. Push the Roll Deck (4) back in.
NOTE
(1) Surely close the Roll Deck until it is locked. A paper jam may occur if not locked perfectly.
(2) Be careful not to catch your finger in between Roll Deck drawers.
7. Pinch and gently pull sheet (if there is) toward you.
WARNING
(1) There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser
Unit, or you will be burnt.
Also the mis-fed media can be very hot. Be careful not to get burnt when you remove it.
(2) The stripping claws (6) with a sharp edge are on the inside face of the Fuser Cover.
Take care not to get scratched on them when removing a sheet.
6
6
3-26
4
6
Chapter 3 Error Correction