Manual Feeder Section Jam (Feeder Part Mis-Feed (1)) - KIP 700 C Series User Manual

3. 1. 5 Manual Feeder Section Jam
(Feeder part Mis-feed (1))
1. Hold the knob (1) and pull out the Bypass Feeder (2).
Pull out the mis-feed cut sheet.
2
1
NOTE
The mis-feed cut sheet should be replaced with a new one if its leading edge has a torn or
fold. Or it should be used upside down to keep the damaged edge from been inserted.
An extremely creased cut sheet may cause mis-feed again.
3-22
Manual Feeder Section
Feeder part Mis-feed (1)
Chapter 3 Error Correction