Toner Supply - KIP 700 C Series User Manual

2. 5

Toner Supply

Reference
When the toner level gets "near to empty", the screen indicates "Replace Toner".
Please add the requested genuine toner as instructed in the screen.
You can add the toner while the printer is in operation.
You have two options when "Replace Toner" message is indicated.
One is to add the toner at the time. Another is to cancel this message and add the toner
later.
A) If you wish to add the toner right then, please add the toner with referring to the
instructions on the later pages, and then press [Toner Added] button in the screen.
B) If you do not add the toner at this time but will do it any time later, please press [Dismiss]
button to temporarily skip the "Replace Toner" message.
The printer will continue printing even if the toner level is in "near to empty" condition.
Please note that the toner shortly runs out and the printer stops printing with showing
"Replace Toner". (This point of time the printer keeps waiting until the requested toner is
added)
Please add the toner with referring to the instructions on the later pages, and then press
[Toner Added] button in the screen.
NOTE
The printer may stop printing without an advance notice "Replace Toner". This situation may
possibly occur when printing with a heavy media by the slow print speed.
2-14 Chapter 2 Basic Operations