KIP 700 C Series User Manual page 62

1. Release the Fuser Release Lever (1) to the arrow direction, and then slide the Fuser Unit
backward.
With paying great attention not to touch the Fuser Unit, remove jammed sheet from between
the printer and the Fuser Unit. If you cannot pinch and remove the sheet, go to the next step.
If you remove this sheet from the printer, please go to the next step to confirm if there is another
sheet in the media path.
WARNING
There are extremely hot parts the Fuser Unit. Do not touch any parts in the Fuser Unit, or
you will be burnt.
2. Hold the handle (2) and pull the Feeder Unit (Manual Feeder) (3).
1
3-7
1
3
Chapter 3 Error Correction
2