Advertisement
4. Pinch and slide the green Tab (8) from one end to the other end at a time. The leading edge
section that is coming out from the slit is cut off, and this straightens the leading edge of the roll
media.
5
NOTE
Please ensure to follow the instruction below when sliding the green Tab.
Incorrect operation will lead you to the damage to the Cutter Unit.
(1) When you slide the green Tab to cut the media, please do not pull it to the front (toward
you) because it will cause to damage the cutter unit.
(2) Please hold only the green Tab when sliding the cutter. Do not hold any other part as it
can cause to damage the Cutter Unit.
(3) Do not touch the cutter Blade under the black plastic cover.
5. Rewind the roll media which had cut on the step 4.
(4-roll model) When you rewind the roll in the lower Roll Deck drawer, first close the Upper Roll
Deck, and then open the Lower Roll Deck.
5
Never pull the green Tab to
the front side
3-25
Chapter 3 Error Correction
Advertisement
Chapters
