Advertisement
5. Slide the green Tab (8) from one end to the other end at a time. The leading edge section that is
coming out from the slit is cut off, and this straightens the leading edge of the roll media.
NOTE
Please surely follow below instructions when sliding the green Tab. Incorrect operation will lead you
to the damage to the Cutter Unit.
(1) When you slide the green Tab to the right or left to cut the media, please do not pull it to the
front because it will cause to damage the cutter unit.
(2) Please hold only the green Tab when sliding the cutter. Please do not hold any other part as it
can cause to damage the Cutter Unit.
8
Never pull the green Tab to
the front side
3-20
8
Chapter 3 Error Correction
Advertisement
Chapters
