KIP 700 C Series User Manual page 91

NOTE
Carefully remove the Exit Tray (3) so as not to touch the clear plastic sheets (4) and the
Discharging Brush (5).
2. Clean 6 Exit Rollers (1) of the Paper Exit section to the arrow direction with the cloth which is
wrung out the water.
NOTE
(1) Clean the Exit Rollers when they are cold, such as "before turning on the printer".
(2) Carefully clean the Exit Rollers so as not to damage the plastic sheet "Ring" (6) adhered to
4 Exit Rollers. (There is no Ring on 2 Exit Rollers in the center)
(See also next page)
4 4
4-3
5
1
6
Chapter 4 Maintenance