KIP 700 C Series User Manual page 184

6. Carefully pull and remove the jammed sheet (9) from the rear.
WARNING
(1) There are extremely hot parts inside the Fuser Unit. Do not touch any parts in the Fuser
Unit, or you will be burnt.
Also the mis-fed media can be very hot. Be careful not to get burnt when you remove it.
(2) The stripping claws (10) with a sharp edge are on the inside face of the Fuser Cover.
Take care not to get scratched on them when removing a sheet.
10
10
3-21
9
10
Chapter 3 Error Correction