Advertisement
10. Define the media information (media type and width) with using the touch screen. If necessary,
press the Trim Button
Press [OK].
Media Type
Media Width
NOTE
(1) Please set correct type and width settings. Incorrect settings would lead unexpected print
results.
(2) If no roll media is installed in the Roll Deck at all, the printer status does not get "Ready"
and the touch screen shows "Attention Required".
Follow the instruction in this section to set a roll media properly, and the status will get
"Ready". If still "Attention Required" remains, contact your local service representative.
Reference
The printer will take a programmed internal cleaning process when a roll media is switched to
another. Please wait until the cleaning finishes and the status gets "Ready".
(Scissors icon) or [Trim all] button.
2-12
Chapter 2 Basic Operations
Advertisement
Chapters
