KIP 700 C Series User Manual page 32

2. Pull the green lever (4) on each Flange (2), which releases the core of roll (3). Remove both
Flanges (2).
2
3. With sliding the Slide Guides (5) left and right by hand, align them to the width guide lines that
match the width of actual media to be loaded. (Sliding either left or right one of 2 Side Guides
also moves the other one by the same amount.)
4. Insert both Flanges (2) deep into the core of new roll media until they stop.
2
(See next page for more explanation)
4
5
2-7
2
2
5
Chapter 2 Basic Operations
3