Advertisement
1. 6. 3
Environmental considerations
Take the necessary actions for environmental conditions as shown below.
Humidity(%)
Possible problem
"Void of image", "crease of paper" and
Low
other problems occurs when you print
with plain paper and tracing paper.
"Void of image" occurs when you print
with tracing paper.
40%
70%
"Void of image" occurs when you print
with plain paper and tracing paper.
"Void of image", "crease of paper" and
other problems occurs when you print
with plain paper and tracing paper.
High
NOTE
"Void of image" and "crease of paper" will occur in case of extremely high or low
humidity.
Normal Print
Normal Print
Necessary treatment
1. Install the humidifier in the room, and
2. Remove the paper from the machine
If you will not make print soon, remove
the tracing paper from the machine and
keep it in a polyethylene bag.
Remove the paper from the machine after
everyday use, and keep it in a
polyethylene bag.
If you will not make print soon, remove
the tracing paper from the machine and
keep it in a polyethylene bag.
Remove the paper from the machine
right after the completion of print, and
keep it in a polyethylene bag.
If the media is humidified;
If the media is humidified;
1-14
humidify the room air.
right after the completion of print, and
keep it in a polyethylene bag.
Crease of paper
Loss of image
Chapter 1 Before Use
Advertisement
Chapters
