Replacing The Roll Media - KIP 700 C Series User Manual

2. 3

Replacing the Roll Media

UI displays a sign of "Roll Replacement" when the used roll media gets empty.
Follow the later procedure to load a new roll media.
1. Open the Roll Deck (1) that has empty roll media.
With catching the Flanges (2) on both sides, lift and remove the core of roll (3).
1
Reference
When a roll paper, without terminated by tape fixing to its core, is set to Roll 1 and has an event
of roll empty, the remaining last portion of the sheet from the roll would stay in the Roll Deck as
shown in the following picture. This is as engineered. Please remove the portion and then
replace the roll media.
2
Roll Deck 1
2-6
2
3
Chapter 2 Basic Operations