KIP 700 C Series User Manual page 133

NOTE
(1) Insert Flanges (2) deep enough into the core of roll media until their inside rims surely
touch the side face of roll media with having no gap.
Inside Rim
Correct: Fully inserted
(2) Be careful not to be harmed by the
saw-toothed edge (6) when handling the
Flanges (2).
5. Turn down the lever (4) in either way until they completely stop, which lets the Flange to surely
hold the roll media.
OK
4
Inside Rim
Gap
Incorrect: There is gap
4
2-8
NG
6
Chapter 2 Basic Operations