Advertisement
4.
Release the Fuser Release Lever (3) to the arrow direction, and then slide the Fuser Unit
backward.
With paying great attention not to touch the Fuser Unit, remove jammed sheet from between
the printer and the Fuser Unit.
NOTE
In the following cases, open the Feeder Unit (Manual Feeder) as well.
If the Fuser Unit cannot be released from the printer.
If the jammed sheet gets stuck and you cannot pull it.
Hold the handle (4) and pull the Feeder Unit
(Manual Feeder) (5).
If you remove this sheet from the printer, please go to the next step to confirm if there is another
sheet in the media path.
WARNING
There are extremely hot parts the Fuser Unit. Do not touch any parts in the Fuser Unit, or you
will be burnt.
(See also next page)
3
3-18
5
3
Chapter 3 Error Correction
4
Advertisement
Chapters
