1. 4
Specifications
Item
Model
Configuration
Printing method
Photoconductor
Print speed
Resolution
Print width
Print length
Cassette(Option)
Warm up time
First print time
Fusing method
Development method
Exposure method
Charging method
Transfer method
Separation method
Media feeding method
Input power
Maximum power
consumption
Acoustic noise
Ozone
Dimensions
Weight
Media
Environmental condition
for usage
NOTE :
1. The above specifications may change without notice.
2. Due to the characteristics of Vellum, it is easy to be affected to the temperature or
humidity.
Under the extreme environment, such as high temperature / high humidity or low
temperature / low humidity, it may have a case of wrinkling problem if you use the
loaded Vellum Roll.
In case of this, adjust the room environment to the normal condition.
Specification
Starprint 6000
Console
LED Array Electro Photography
Organic Photoconductive Drum
100mm per second (4 E per minute)
600dpi
Maximum width
Minimum width
Maximum length
Minimum length
NOTE : If the print is longer than 6m, we do not guarantee image
quality or the reliability of media feeding systems.
8.5" x 11", 11" x 8.5", 11" x 17", 17" x 11", 22" x 17", 24" x 18"
200 sheets / Cassette (Plain Paper)
120V = less than 8 minutes
24 seconds (E print from 1st Roll Deck)
Roll Fuser
Dry type with non-magnetic mono-component toner
LED
Corona
Corona
Corona
1. Automatic (2 Roll Decks) + Manual
2. Automatic (4 Roll Decks) + Manual
3. Automatic (2 Roll Decks) + Manual + Cassette (Option)
120V plus or minus 10%, 16A and 50/60Hz
Dehumidify Heater is ON
0.45kwh (Stand by) / 1.54kwh (Printing)
Less than 55db (Stand by) / Less than 60db (Printing)
Smaller than 0.1ppm (Average)
1420mm (Width) x 625mm (Depth) x 900mm (Height)
230kg (In case of 2 Roll Decks Model)
270kg (In case of 4 Roll Decks Model)
280kg (In case of 2 Roll Decks + 2 Cassettes Model)
(Recommended Media)
Plain Paper
Vellum
Film
Temperature
10 to 32 degrees centigrade
Humidity
15 to 85% RH
1-5
36 inches
11 inches (Roll Media)
8.5 inches (Cut Sheet )
19.2 ft ( 6m ) (Standard)
24m or unlimited (Optional)
8.5 inches
US Bond (PB-20)
US Vellum (XV-20)
4MIL (XPD-4X)
Chapter 1
Before Use
Need help?
Do you have a question about the STARPRINT 6000 and is the answer not in the manual?