Table of Contents
Advertisement
Maintenance Summary - Care activities
AM095
- Check work area light (visual inspection)
Orientation
Requirement
Procedure
Maintenance Instructions
MS32-6.3
DIM105EN - 26.04.2022
To ensure even illumination of the working areas in the machine, work area lights are
installed in the work area.
These enable safe working and must therefore be checked regularly. Maintenance
and repair work on damaged lamps may only be carried out by a qualified
electrician or must be checked by the manufacturer or replaced immediately.
Service and maintenance are to be carried out according to the
manufacturer's specifications.
1.
For extended periods of downtime or maintenance time,
cleaning of the light surfaces is recommended. This prevents
premature clouding of the light surfaces.
Clean light surfaces. Only use a cloth soaked in normal household detergent.
2. Check all lamps (visual inspection).
3.
Example: Work lamp MTAL 4 S (Waldmann)*
27
Advertisement
Table of Contents
