Index MS32-6.3 Operating Instructions Manual page 24

Requirement
Procedure
20
Example: Pneumatic maintenance unit (Festo) MS32-6.3 MS24-6
1 Compressed air supply line
2 Shut-off valve, manually operated
a Filter regulating valve (factory setting 6 bar/ min. 3.0 bar or 4.0 bar)
b Fire shutter branch module
b' Fire protection system choke
c
Switch-on valve (electrically operated) with silencer
d Pressure regulation "loading magazine"
e High-precision pressure regulating valve (factory set to 0.3 bar) with pressure monitoring
f Pressure distribution system
f Compressed air system, top
1
f Compressed air system, bottom
2
g "Leakage oil extraction" valve
h "Control auxiliary air" valve
i "Control auxiliary air" pressure monitoring
(*) Check by manually pushing (using a ballpoint pen or similar) the yellow button of the switch-on valve (c)
Power off the machine to depressurize the pneumatic system and
secure against accidental switching on.
1. Check fluid lines. Fluid lines must be checked for damage. Pre-damage such
as kinks or abrasions should be logged and replacement should be initiated.
Maintenance Summary - Care activities
.
(*)
Maintenance Instructions
MS32-6.3
DIM105EN - 26.04.2022