Table of Contents
Advertisement
AM290
- Clean collets and base body
Orientation
Requirement
40
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
The Hainbuch "ToPlus" clamping system is provided for this lathe. This clamping
system is suitable for square, hexagonal and bar stock. The collets and collet
mountings must be cleaned regularly depending on the machine utilization, the type
of machining, and the materials used. Hainbuch offers various tools for removal and
installation.
Example: Clamping head (Hainbuch)
Example: Manual and hydraulic changing device (Hainbuch)
Due to different requirements and/or specifications of the respective
manufacturers, be sure to review the respective manufacturer's
documentation!
To clean the collets, sufficient quantities of cleaning agent such as benzine as well
as grease (oil-resistant) for greasing the collets are necessary. For the operating
Maintenance Summary - Care activities
Maintenance Instructions
DIM105EN - 26.04.2022
MS32-6.3
Advertisement
Table of Contents
