Index MS32-6.3 Operating Instructions Manual page 38

Procedure
34
1. Check coolant.
2. Check fluid lines for damage such as buckling and abrasions, and for liquid
leaks. If necessary, replace fluid lines. Record the age or date of replacement of
fluid lines in the service, testing and maintenance schedules or reports.
3.
Example: Cooling water distribution unit MS24-6/ MS32-6.3
a Shut-off valve 1
b Shut-off valve 2
c Filter insert with O-ring
d Filter cover
e Valves
f Flow monitor
Check the filter in the cooling water distribution unit. Close the two shut-off
valves. Open the filter cover and remove the filter insert. Clean the filter insert or
replace if necessary and refit. Close the filter cover again and reopen the shut-
off valves.
4. Check water temperature and flow rate of cooling water (sensor system).
Maintenance Summary - Care activities
Maintenance Instructions
DIM105EN - 26.04.2022
MS32-6.3