Index MS32-6.3 Operating Instructions Manual page 40

Procedure
36
1.
Clamping element holder with forcing pins
1 M6 forcing pin, thread closed with M8 setscrew (3x)
2 Cylinder head screw (6x)
3 Grease nipple (3x)
Remove cylinder head screw (2). Remove setscrews (1). Forcing pins become
visible. .
2. Hold clamping element holder and tighten forcing pins (1) crosswise. Clamping
element holder is pushed out. Remove clamping element holder from spindle
nose.
3. Clean clamping element holder, observing manufacturer's documentation.
Maintenance Summary - Care activities
Maintenance Instructions
DIM105EN - 26.04.2022
MS32-6.3