Table of Contents
Advertisement
Maintenance Summary - 8 Years
Maintenance Instructions
MS32-6.3
DIM105EN - 26.04.2022
The front cover is also the front pane/design pane (a). The design pane is
screwed to the work area door. Loosen M6 screws (9x) along the contour (see
Fig. 3). Do not remove the door handle; it also serves as a grab handle.
Secure the pane (39.2kg) additionally with a suitable suction lifter.
Remove design pane, carefully place aside and secure against tipping over.
2.
Example: MS32-6.3 window pane of work area door 3 (Fig. 4)
Cut open the sealant (s) on the inside of the window pane with a suitable cutter
(see Fig. 4)
87
Advertisement
Table of Contents
