Table of Contents
Advertisement
Maintenance Summary - 8 Years
Maintenance Instructions
MS32-6.3
DIM105EN - 26.04.2022
Seal the inner pane in the work area with sealant (s) again. After the assembly
of the panes and frame parts, the inner pane must be sealed using a sealant
(Terostat 930 gray is used at the factory). (See Fig. 8)
8.
Example: MS32-6.3 window pane of work area door 5.3 (Fig. 9)
Checking the sealing tape (d) on the clamping frame. Be sure to check the
sealing tape on the clamping frame before reinstalling the design pane. It may
have been damaged during disassembly and must be replaced in this case.
Remove old sealing tape completely and apply new sealing tape to the
clamping frame as described in Fig.: 9. The sealing tape can be obtained
directly from INDEX or from an INDEX representative.
91
Advertisement
Table of Contents
