Starter Clutch Removal; Cam Chain Trnsioner - KYMCO NEXXON 50 Service Manual

8. ALTERNATOR/STARTER CLUTCH/
CAM CHAIN TENSIONER
9.
Remove the clamp.
Remove the five bolts and alternator stator
base from the crankcase cover.
＊
• Do not disassemble the stator and pulse
generator coils.

STARTER CLUTCH REMOVAL

REMOVAL
Drain the engine oil (page 3-3)
Remove the alternator (page 8-3)
Remove the stopper plate and chain sliders.
Remove the snap ring.
Remove the chain, starter drive sprocket and
driven sprocket as an assembly.
Remove the two screws, base plate and three
O-rings.
INSPECTION
Inspect the chain sliders for wear or damage.
Replace them if necessary.
Clamp
Stator Base
Snap Ring Drive Sprocket
Chain Sliders
Screws
Chain Sliders
NEXXON 50
Bolts
Stopper Plate
Driven Sprocket
Base Plate
8-4