Starter Clutch Installation - KYMCO NEXXON 50 Service Manual

8. ALTERNATOR/STARTER CLUTCH/
CAM CHAIN TENSIONER
9.
Check the push rod valve for clogged
Check the push rod for wear or scraches.
Measure the push rod O.D.
Service limit: 11.945 mm
INSTALLATION
Install the cam chain tensioner and secure it
with the pivot bolt.
Install the tensioner rod, spring, sealing
washer bolt.
Tighten the tensioner sealing bolt.
TORUQE: 1.5～2.5 kg-m
＊
Install the tensioner spring with its small
coil end up.
Install the starter clutch and alternator (page
8-6)
STARTER CLUTCH
INSTALLATION
Install the new O-rings onto the left
crankcase and base plate,
Install the base plate, being careful not to
damage the O-ring.
Tighten the base plate screws.
One Way Valve
Tensioner
Spring
O-rings
NEXXON 50
Tensioner Rod
Sealing Washer And Bolt
Base Plate
8-6