KYMCO NEXXON 50 Service Manual page 10

1
. GENERAL INFORMATION
Route harnesses so they are neither
pulled tight nor have excessive slack.
Protect wires and harnesses with
electrical tape or tube if they contact a
sharp edge or corner.
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
Do not break the sheath of wire.
If a wire or harness is with a broken
sheath, repair by wrapping it with
protective tape or replace it.
When installing other parts, do not press
or squeeze the wires.
NEXXON 50
Do not pull
too tight!
Do not press or
squeeze the wire.
1-8