KYMCO NEXXON 50 Service Manual page 138

12
. REAR WHEEL/BRAKE/SUSPENSION
Place the rear wheel in a turning stand and
measure the rim runout.
Service Limits:
Axial: 2.0mm
Radial: 2.0mm
Check the wheel spoke wires for looseness.
Check the wheel bearing play by placing
the wheel in a turning stand and spinning
the wheel by hand.
Check the drive chain gear teeth for wear or
damage.
Replace the drive chain gear if necessary.
＊
If the drive chain gear teeth are worn or
damaged, also check the drive chain
and replace if necessary.
12-5
NEXXON 50
Axial
Good
Radial
Replace