KYMCO NEXXON 50 Service Manual page 131

11
. FRONT WHEEL/SUSPENSION/
STEERING
NEXXON 50
BALL RACE REPLACEMENT
Remove the top and bottom ball races.
Ball Race Remover
Bearing Driver Handle
Drive the top and bottom ball races into the
steering head using a bearing driver.
Special
Bearing driver handle
Bearing installer
Attachment, 37x40mm
BOTTOM CONE RACE REPLACEMENT
Drive out the bottom cone race.
Install a new washer and dust seal onto the
steering stem and then drive in a new bottom
cone race onto the steering stem.
11-17