KYMCO NEXXON 50 Service Manual page 132

11
. FRONT WHEEL/SUSPENSION/
STEERING
STEERING STEM INSTALLATION
Apply grease to the top and bottom ball races
and steel balls.
Install 23 steel balls each on the top and 29
steel balls on the bottom ball races. Apply
grease to the ball races again and then install
the steering stem.
Steel balls: 6mm
Apply grease to the top cone race and install
it.
Tighten the top cone race and then turn the
steering stem right and left several times to
make steel balls contact each other closely.
＊
Check that the steering stem rotates
freely and that there is no vertical play.
Install the steering stem lock nut and tighten
it while holding the top cone race.
Torque: 6.0～8.0kg-m
Install the handlebar.
Install the speedometer cable.
Special
Lock nut socket wrench
Steel Balls
Lock nut wrench
Lock Nut Socket Wrench
Lock Nut Wrench
NEXXON 50
11-18