KYMCO NEXXON 50 Service Manual page 54

4
. FUEL SYSTEM
FUEL TANK
FUEL TANK REMOVAL
Warning
• Keep sparks and flames away from the
work area.
• Wipe off any spilled gasoline.
Turn the fuel valve to "OFF".
Remove the three bolts attaching the rear
carrier.
Remove the four seat lock nuts.
Remove the tool box mounting bolt and tool box.
Disconnect the fuel strainer and remove the nuts on
the end of the fuel tank.
Disconnect the fuel unit wire connector and fuel
gauge wire.
Remove the fuel tank.
FUEL STRAINER REMOVAL
Remove the fuel strainer from the fuel tank.
INSPECTION
Inspect if the fuel strainer is clogged and
clean it with compressed air.
＊
• When removing the fuel strainer, do not
allow flames or sparks near the working area
and drain the residual gasoline into a
container.
INSTALLATION
Install the fuel strainer with its arrow mark
toward the fuel pump.
FUEL TANK INSTALLATION
Install the fuel tank in the reverse order of removal.
Check that there is no fuel leakage.
Check the wire connectors for proper
connection.
4-11
NEXXON 50
Screw
Screw
Fuel Unit Wire
Fuel Strainer
Fuel Unit Wire
Fuel Strainer