KYMCO NEXXON 50 Service Manual page 126

11
. FRONT WHEEL/SUSPENSION/
STEERING
Use a vise to hold the front shock absorber
tube and remove the damper from the shock
absorber tube.
＊
When holding the shock absorber tube,
place a shop towel under it and do not
apply too much force.
Use a vise to hold the front fork bottom tube
and place shop towels under the bottom tube.
Remove the socket head bolt.
＊
• When using the vise, do not tighten the
front fork bottom tube excessively.
• If it is difficult to remove the socket
head bolt, temporarily install the front
fork spring and front fork bolt.
Remove the front fork piston and return
spring. Remove the front fork bottom tube
and the oil stopper.
Remove the dust seal and snap ring. Take
out the oil seal and circlip.
＊
• Do not damage the bottom tube when
taking out the oil seal and circlip.
• Be sure to replace the removed oil seal
and circlip with new ones during
assembly.
Front Fork Spring
6mm Socket Spanner
Oil Seal
NEXXON 50
Snap Ring
11-12