Chapter 2 Functions Of The Configuration Tool; Starting And Exiting The Configuration Tool - Mitsubishi Electric MELSEC iQ-R User Manual

2
FUNCTIONS OF THE CONFIGURATION TOOL
This chapter describes the configuration tool for creating the hardware logic and writing it into the flexible high-speed I/O
control module.
2.1

Starting and Exiting the Configuration Tool

This section describes how to start or exit the configuration tool.
Start
Follow the steps below.
[Tool]  [Module Tool List]
1.
Select "iQ-R-Series" for "Module Series Selection".
2.
Select [Pulse I/O/Positioning]  [Flexible high-speed I/O control module configuration tool], and click the [OK] button.
3.
The configuration tool is started.
2 FUNCTIONS OF THE CONFIGURATION TOOL
54
2.1 Starting and Exiting the Configuration Tool