Operation; Engine Control Devices; Front Panel Connections And Control Devices - ESAB Ruffian ES 150G EDW Instruction Manual

6 OPERATION

6 OPERATION
General safety regulations for handling the equipment can be found in the "SAFETY"
chapter of this manual. Read it through before you start using the equipment!
NOTE!
When moving the equipment use intended handle. Never pull the cables.
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
6.1

Engine control devices

Engine ON/OFF Switch: It is
1
used to enable or disable the
ignition system of the engine
2 Fuel Valve: It is used to open or
close the passage of gasoline
from the fuel tank to the engine
3 Choke Lever: It is used to alter
the air-fuel ratio entering the
engine
6.2

Front panel connections and control devices

0463 905 001
Retractable Starter: It is used to start
4
the engine manually
5 Hour meter: Only when the engine is
running, the hour meter is illuminated
and operates, then indicates total
hours of the engine used
- 29 -
© ESAB AB 2022