Welder Routine Maintenance; Cleaning Instruction - ESAB Ruffian ES 150G EDW Instruction Manual

8 MAINTENANCE
NOTE!
Tighten the spark plug properly, to avoid the engine overheating and block damage.
8.2

Welder routine maintenance

Maintenance schedule during normal conditions. Check equipment prior to every use.
Interval
Every 3 months
Every 6 months
8.3

Cleaning instruction

To maintain the performance and increase the lifetime of the power source it is mandatory to
clean it regularly. How often depends on:
• the welding process
• the arc time
• the working environment
CAUTION!
Make sure that the cleaning procedure is done in a suitable prepared workspace.
CAUTION!
During cleaning, always wear recommended personal safety equipment, such as
ear plugs, safety glasses, masks, gloves and safety shoes.
1. Turn off the engine.
WARNING!
Wait at least 30 seconds for the capacitors to discharge before continuing.
0463 905 001
Clean or replace
unreadable labels.
Clean inside
equipment. Use dry
compressed air with
reduced pressure.
- 41 -
Area to maintain
Clean weld terminals. Check or replace weld
cables.
© ESAB AB 2022