Ac Auxiliary Power Guide; Ac Auxiliary Power Supplied By The Generator; Ac Auxiliary Power Required By The Load; Approximate Ac Auxiliary Power Requirements By Loads - ESAB Ruffian ES 150G EDW Instruction Manual

Engine driven welder mma 150a
Table of Contents

Advertisement

7 AC AUXILIARY POWER GUIDE

7
AC AUXILIARY POWER GUIDE
NOTE!
A generator that is rated more than the minimum required maximum starting watts will
last much longer than a generator that only supplies the exact watts needed.
7.1

AC Auxiliary Power supplied by the generator

1- LIMIT LOAD TO 90% OF GENERATOR NOMINAL OUTPUT.
Always start connecting the non-resistive (motor) loads from high to low power and then add
resistive loads.
2- 5 SECONDS RULE.
If the motor connected does not start within 5 Seconds, turn off the machine to prevent the motor
to be damaged. It may require more power than the generator supplied power.
7.2

AC Auxiliary Power required by the load

Before using the AC auxiliary power, check that the products to plug into that socket are rated
below and within the maximum wattage of the generator.
A
1.
dd up the running Watts for all items you would like to use at any given time. To
calculate the power consumed by the load you can multiplied Volts and amps to get watts
(volts x amps = watts).
2. Make sure that the products total ratings should not exceed the 4,000 running watts of the
Generator.
3. Find the single highest starting watts for the selected items and add to the total.
4. Make sure that the products total ratings should not exceed the 4,500 maximum starting
watts of the Generator.
5. Plug in and turn on the loads from the high to low watts.
7.3

Approximate AC Auxiliary Power requirements by loads

NOTE!
For most lights or heaters: there are no additional start-up watts.
JOB SITE
Hand Drill
Circular Saw
Table Saw
Air Compressor
Bench Grinder
High Pressure Washer
0463 905 001
Rating Starting Watts Running Watts
1/4"
350
3/8"
400
1/2"
600
6-1/2"
500
7-1/4"
900
8-1/4"
1400
9"
4500
1/2 HP
3000
6"
1720
8"
3900
1/2 HP
3150
3/4 HP
4500
- 35 -
350
400
600
500
900
1400
1500
1000
720
1400
950
1400
© ESAB AB 2022

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents