Installation; Location - ESAB Ruffian ES 150G EDW Instruction Manual

5 INSTALLATION

5 INSTALLATION
The installation must be carried out by a professional.
CAUTION!
This product is intended for industrial use. In a domestic environment this product
may cause radio interference. It is the user's responsibility to take adequate
precautions.
5.1

Location

Position the engine driven welder so that cooling air inlets and outlets are not obstructed.
WARNING
!
Secure the equipment - particularly if the
ground is uneven or sloping.
0463 905 001
- 22 -
© ESAB AB 2022