Table of Contents
Advertisement
4 INSTALLATION
3
TECHNICAL DATA
Capacity
Voltage
Frequency
Output
Temperature
Outer dimensions (L*W*H, cm)
Weight (Without electrodes)
NOTE!
Oven heating temperature can be set from surrounding ambient to 400 °C.
4
INSTALLATION
NOTE!
Make sure that the technical specification on the product corresponds to the electrical supply
in your network.
Check the voltage, frequency information and check that there is no fault that will affect the
operation of the product.
4.1
Operation
WARNING!
When the oven is not in use, turn the power knob to "O" position and remove power cord plug
from electrical outlet.
•
Connect oven power cord plug to a power outlet as recommended in the technical
information. Make sure the power outlet socket matches the oven power plug type.
•
Load electrodes onto oven shelfs (trays). Do not place anything else (packaging
material, etc. as high temperature can burn it and cause fire inside the oven) besides
electrodes on these metal trays. Do not overfill trays and make sure the door can be
latched properly.
•
Lock the door.
•
On the oven control panel, to turn on the oven change power knob to "I" position.
0448 019 001
100 kg (220 lbs.)
3 phase 380-415 V
Up to 400 °C (752 °F) Digital thermostat
53 × 72 × 138
90 kg (198 lbs.)
- 5 -
SDE-100
50/60 Hz
3000 W
© ESAB AB 2023
Advertisement
Table of Contents
