GB
6
OPERATION
General safety regulations for the handling of the equipment can be found on
page 14. Read through before you start using the equipment!
6.1
Connections and control devices
1
Connection (+) for the return cable for TIG.
MMA: for the return cable or the welding
cable.
2
Connection for the remote control unit
3
Control panel (see separate instruction
manual)
4
Connection for the TIG--torch
5
Connection for gas to the TIG--torch
6
Connection (--) for the TIG--torch
MMA: return cable or welding cable
bt34d1ea
7
8
9
10
11
12
* ESAB Logic Pump, see under
- - 19 - -
Mains switch
Mains cable
Connection for shiedling gas
Connection BLUE, with ELP* for cooling
water from the cooling unit
Connection RED for cooling water to the
cooling unit.
Refilling of cooling water
6.3