Operation; Connections And Control Devices - ESAB WARRIOR EDGE 500 DX Instruction Manual

5 OPERATION
5

OPERATION

General safety regulations for handling the equipment can be found in the "SAFETY" chapter
of this manual. Read it through before you start using the equipment!
NOTE!
When moving the equipment use intended handle. Never pull the cables.
WARNING!
Electric shock! Do not touch the workpiece or the welding head during operation!
5.1

Connections and control devices

1. Mains power supply switch, O/I
2. Connection for remote control unit
3. Power connection to wire feed unit
4. Negative welding terminal: Return cable
5. Fuse (10 A) for supply voltage for wire feeder
unit
6. Positive welding terminal: Welding cable
7. Connection RED for coolant (return) to cooling
unit
0463 772 101
8. Connection BLUE for coolant from cooling unit
9. USB connection ports
10. Current/Voltage encoder knob
11. Process selection knob
12. WeldCloud Ethernet connection
13. Mains cable
14. Coolant tank
- 16 - © ESAB AB 2024