Error Code - ESAB Ruffian ES 150G EDW Instruction Manual

10 ERROR CODE

10 ERROR CODE
The error code is used to indicate that a fault has occurred in the equipment. Errors are
indicated by the letter "E" followed by the error code number shown in the display.
Error code Description
E 1
Temperature fault
The temperature of the welder is too high. A temperature fault is indicated by
the Fault indicator on the control panel.
Action: The error code will automatically disappear and the Fault indicator
light will be turned off when the power source has cooled down and is ready
for use again. If the error persists, contact a service technician.
0463 905 001
- 45 -
© ESAB AB 2022