Operation; General; Changing The Speed Range - ESAB A6 Slide Manual

GB
4

OPERATION

4.1

General

Caution:
Have you read and understood the safety information ?
You must not operate the machine before then !
General safety regulations for the handling of the equipment can be found on
page 85. Read through before you start using the equipment!
WARNING
Rotating parts can cause injury, take great care.
4.2

Changing the speed range

WARNING!
Falling load can cause damage.
When replacing the belt or the belt pulley the load must be secured.
Replacing the belt pulley
Before starting the work, secure the load by running the slide/load to the bottom
position in order to prevent the load falling.
Max speed Wheel on motor
70 cm/min
175 cm/min 30 teeth, for slip
110 cm/min 30 teeth, for slip
When replacing the pulley, turn the cover plate between the motor and the motor
bracket so that the mounting holes get covered.
NB. When mounting or dismounting the belt pulley with the slip coupling the
lubricated cup springs must not get into contact with the friction surface of the pulley,
friction ring or friction stop.
fgb5o1ea
Wheel on ball
shaft screw
19 teeth 30 teeth, for slip
coupling
19 teeth
coupling
30 teeth
coupling
- - 98 - -
Motor Cover plate
334 322- -001
shaft journal, 334 321--001
length 25 mm T=1mm
shaft journal, 334 321--001
length 25 mm
shaft journal, 334 321--001
length 25 mm