Syn-Tech Systems FuelMaster FMU-2500 Classic Installation Manual page 134

FuelMaster Installation Manual
®
The seventh column, Require OINK*, will have a check mark if an Opto-Isolator has been developed for
the application. OINKs (abbreviation for Opto-Isolators) were developed by Syn-Tech Systems several
years ago to interface electronic dispensers (for commercial/fleet purposes) when there was no Electronic
Dispenser Interface Kit. Where the OINKs provide an interface sufficient for commercial or fleet
applications, they do not possess the accuracy necessary for retail (Weights & Measures) applications.
The asterisk (*) brings attention to the note stating OINKs do not have sufficient accuracy for retail
applications.
The eighth column, Note, contains a number corresponding to a note on the last page of the listing.
These Notes should be followed to correctly interface an FMU to the dispenser make and model shown
on that line of the listing.
The last column, DoD Compatible (see Notes), was added to make it easier for our DoD customers to
quickly determine if a direct interface is possible between a DoD FMU, and a specific make and model of
a fuel dispenser. DoD FMUs will not presently interface electronic dispensers.
If you have questions after reviewing the FuelMaster Dispenser Compatibility listing, please call our
®
Customer Satisfaction Center at 800-888-9136, ext. 1500, for assistance. Technicians with knowledge of
commercial and DoD fuel management systems are available to assist you.
132