Table of Contents
Advertisement
9
Parts list
9.1 Included in the box
8
Item
Description
FORTiS-S FS
The FORTiS-S FS enclosed
encoder unit
encoder system
37 mm readhead
Plastic shim to be used as an
setting shim
installation aid
Air connection
To enable connection to one of
fitting
the encoder air purge inlets
Used for securely connecting
Cable connection
the encoder cable to the
wrench
readhead
2 × brackets secure the
readhead during transit, and
Alignment
set the correct readhead
brackets
alignment during installation.
IMPORTANT: Retain until
installation is complete.
FORTiS-S FS
Certifies specific encoder
quality inspection
performance and provides
certificate
traceability
Shows the web address for
Yellow Functional
accessing the installation
Safety card
guide.
9.2 Not included / required tools
Item
Description
5 mm torque
To tighten extrusion and
wrench
readhead mounting screws
Air bung removal (only if air
1.5 mm hex key
purge is required)
5 mm hex key
For securing of readhead
4 mm hex key
For locking of mounting aid
2 × M6 × 1.0 screws length
≥ 35 mm for mounting
readhead
M6 × 1.0 screws length
M6 screws
≥ 20 mm for mounting
extrusion to machine bed
(see table in
section 11.5
on page 13
for required
quantity)
Original instructions
Advertisement
Table of Contents
