Table of Contents
Advertisement
6
Certification
FORTiS-N FS encoder system
Functional Safety Certificate No. FSC003
SIL2
FUNCTIONAL
SAFETY
Under the terms of CSA SIRA Functional Safety Certificate SIRA CASS00023/02, for the
management and self‑certification of functional safety activities up to SIL3/PLd.
Renishaw plc declares that the products listed by this installation guide meet the requirements of:
•
IEC 61508‑1:2010, IEC 61508‑2:2010 and IEC 61508‑3:2010
•
IEC 61800‑5‑2:2016
•
ISO 13849‑1:2015 and ISO 13849‑2:2012
when used as an element/subsystem in safety-related systems performing safety functions
requiring up to and including:
•
SIL2 with HFT = 0 (1oo1)
•
Category 3, PLd.
PLd
7
Summary of EU declaration of conformity
EUD 2021-00819
EU based person authorised to compile the technical file: Renishaw (Ireland) DAC, Swords
Business Park, Swords, Co. Dublin, K67 FX67, Ireland.
This declaration of conformity is issued under the sole responsibility of the manufacturer, Renishaw
plc. The object of the declaration is identified below:
Product name:
FORTiS-S
FS and FORTiS-N
™
Description:
Enclosed linear FS readhead and scale assembly
Part no.:
Valid from:
Description:
FS1-----------S----
-02
FORTiS-S
FN1-----------S----
-02
FORTiS-N
The object of the declaration described above is in conformity with all relevant EU harmonisation
legislation and fulfils all the relevant provisions with EU directives:
2006/42/EC
Machinery Directive
2014/30/EU
Electromagnetic Compatibility (EMC)
2011/65/EU
On the restriction of the use of certain hazardous substances in electrical
and electronic equipment – RoHS
and complies with the following technical standards:
EN ISO 12100:2010
Safety of machinery – General principles for design –
Risk assessment and risk reduction
EN ISO 13849‑1:2015
Safety of machinery – Safety-related parts of control systems
Part 1: General principles for design (ISO 13849‑1:2015)
EN ISO 13849‑2:2012
Safety of machinery – Safety-related parts of control systems
Part 2: Validation (ISO 13849‑2:2012)
EN 61326‑1:2013
Electrical equipment for measurement, control, and laboratory use.
EMC requirements
Part 1: General requirements
EN 62471:2008
Photobiological safety of lamps and lamp systems
EN IEC 63000:2018
Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
For the full Declaration of Conformity EUD 2021‑00819 see:
www.renishaw.com/productcompliance
FS enclosed encoder system
™
FS standard size enclosed linear encoders
™
™
FS narrow size enclosed linear encoders
www.renishaw.com
13
Advertisement
Table of Contents
