Summary Of Uk Declaration Of Conformity - Renishaw FORTiS-N Installation Manual

8

Summary of UK declaration of conformity

UKD 2021-00819
This declaration of conformity is issued under the sole responsibility of the manufacturer, Renishaw
plc. The object of the declaration is identified below:
Product name: FORTiS-S FS and FORTiS-N
™
Description: Enclosed linear FS readhead and scale assembly
Part no.: Valid from: Description:
FS1-----------S---- -02 FORTiS-S
FN1-----------S---- -02 FORTiS-N
The object of the declaration described above is in conformity with all relevant UK Statutory
Instruments (and their amendments):
S.I. 2008 No. 1597 Supply of Machinery (Safety) Regulations 2008
S.I. 2016 No. 1091 Electromagnetic Compatibility Regulations 2016
S.I. 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012 – RoHS
and complies with the following technical standards:
EN ISO 12100:2010 Safety of machinery – General principles for design –
Risk assessment and risk reduction
EN ISO 13849‑1:2015 Safety of machinery – Safety-related parts of control systems
Part 1: General principles for design (ISO 13849‑1:2015)
EN ISO 13849‑2:2012 Safety of machinery – Safety-related parts of control systems
Part 2: Validation (ISO 13849‑2:2012)
EN 61326‑1:2013 Electrical equipment for measurement, control, and laboratory use
EMC requirements
Part 1: General requirements
EN 62471:2008 Photobiological safety of lamps and lamp systems
EN IEC 63000:2018 Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
For the full declaration of conformity UKD 2021‑00819 see:
www.renishaw.com/productcompliance
14 FORTiS-N Functional Safety enclosed encoder system – original instructions
FS enclosed encoder system
™
FS standard size enclosed linear encoders
™
™ FS narrow size enclosed linear encoders