Table of Contents
Advertisement
1.5 Federal Code Of Regulation (CFR) FCC Part 15
– RADIO FREQUENCY DEVICES
FCC Compliance Statement
47 CFR Section 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
47 CFR Section 15.21
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or
authorised representative could void the user's authority to operate the equipment.
47 CFR Section 15.105
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at their own expense.
47 CFR Section 15.27
This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used
with the unit to ensure compliance.
Supplier's Declaration of Conformity
47 CFR § 2.1077
Unique Identifier: FORTiS-N
Responsible Party – U.S. Contact Information
Renishaw Inc.
1001 Wesemann Drive
West Dundee
Illinois
IL 60118
United States
Telephone number: +1 847 286 9953
Email: usa@renishaw.com
ICES-003 – Information Technology Equipment (including
Digital Apparatus)
This ISM device complies with Canadian ICES-003(A).
Cet appareil ISM est conforme à la norme ICES-003(A).
1.6 Intended use
The FORTiS encoder system is designed for metrology in industrial environments, such as machine
tools. It must be installed, operated, and maintained as specified in Renishaw documentation and
in accordance to the Standard Terms and Conditions of the Warranty and all other relevant legal
requirements.
1.7 Warnings
In all applications involving the use of machine tools, eye protection is recommended.
www.renishaw.com
7
Advertisement
Table of Contents
