System Options; Show Failures History With System Diode; Ignore Ats Failure; Turn Automatic Override For Failure Off - EBS CPX200N Installation And Programming Manual

8.3.3.3. Activation time
The parameter defines the time the output is to be active.
8.3.3.4. Bistable
This parameter sets the output to the bistable work.

8.4. SYSTEM OPTIONS

8.4.1.

Show failures history with SYSTEM diode

Selecting this option indicates that a fault occurred in the system and be completed. This
condition will be indicated by flashing SYSTEM LEDs on the keyboard KP10 until cleared
the fault memory.
8.4.2.

Ignore ATS failure

Selecting this option turns off signaling a loss of communication with the server on KP10
keypad.
8.4.3.

Turn automatic override for failure off

Selecting this option enables the system fault signal when arming.
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL 64 / 106