Table of Contents
Advertisement
memory function is displayed.
code from the main menu:
Other alarm source types:
Keypads
2 –
tamper
Other alarm source types -> Keypads tamper:
1 – Keypad tamper 1
2 – Keypad tamper 2
3 – Keypad tamper 3
Note: Alarms memory is cleared after the system is armed.
5.8.
FAULTS MEMORY
The function displays faults that are present in the system. When the function is activated,
SYSTEM and PROG LEDs are flashing slowly and all faults that are currently present in the
system are displayed. Led 1 – 8 display information on the cause of fault. To clear the faults
memory, press
Faults description:
Sabotage of zones
1 –
Fault of output 1 - 3
2 –
Fault of feeding output
3 –
AC fault
4 –
Battery fault
5 –
ATS fault
6 –
Other damages
7 –
To display more detailed information on faults, press
return to the main fault menu, press
Button 1 – Sabotage of zones:
1 – Sabotage of zone 1
2 – Sabotage of zone 2
3 – Sabotage of zone 3
4 – Sabotage of zone 4
5 – Sabotage of zone 5
6 – Sabotage of zone 6
7 – Sabotage of zone 7
Button 2 – Fault of output 1 - 3:
1 – Fault of output 1
2 – Fault of output 2
3 – Fault of output 3
Button 3 – Fault of feeding output:
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
Other alarms
.
- Display of faults memory
. To exit without clearing the faults memory, press
history can also be accessed by selecting following
or press
to exit the function.
.
or
button. To
25 / 106
Advertisement
Table of Contents
