Description Of Pcb Elements; List Of Drawings And Diagrams Drawing 1. Description Of Pcb Elements - EBS CPX200N Installation And Programming Manual

3.2. DESCRIPTION OF PCB ELEMENTS

1. GSM Antenna Connector (female SMA)
GSM antenna is delivered separately as one of the optional system components. It is
recommended to use antenna with cable that allows finding adequate position ensuring
optimal GSM range. The control unit is compatible with GSM antenna with male SMA
connector.
2. Slot of SIM Card
The control unit is equipped with integrated GSM/GPRS/SMS transmitter. SIM card with
active GPRS transmission is necessary to communicate with the server. The card shall be
installed in the slot indicated in the drawing.
NOTE: Before you insert the card, make sure that PIN code
authorisation is deactivated, or PIN code is compliant with the code
programmed in the control unit. Default factory PIN code of the control
unit is 1111.
3. Yellow "STATUS" LED
For the detailed description of "STATUS" LED operation, please refer to chapter 9.
4. Red "ERROR" LED
For the detailed description of "ERROR" LED operation, please refer to chapter 9.
CPX200N ALARM CONTROL UNIT – INSTALLER MANUAL
Drawing 1. Description of PCB elements
10 / 106